Garage Door Repair - 5 Simple Things To Check

Garage door repair can often be done by the owner himself. There are at least 5 simple things to check, before calling a professional. Some repairs are extremely easy. For example, a stiff or squeaky door will simply require good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are extremely dangerous and require the help of a professional.

Before proceeding to repair, be sure to unplug your garage door opener so that you do not receive an electric shock while repairing your garage door. Chances are you are standing on a ladder which is a very bad place to get an electric shock as it can also fall off the ladder. Also, remember to wear safety glasses when working with power tools.

Here is a list of things to check before calling a professional for your garage door repair:

1. Check metal tracks for damage

This easy garage door repair suggestion can often solve the problem very quickly. Metal tracks can often have dents or bumps. If you find such damage, hit the damaged part of the track with a wooden block and hammer to straighten the track.

2. Check the alignment of the tracks

If the tracks are not well aligned, they may be causing the door to not work. It is not always necessary to unscrew the tracks; You can just try loosening the bolts or screws and tapping the tracks lightly into position. Use a level to check the alignment of the tracks. The aligned tracks will allow you to finish your garage door repair in no professional garage door repair.

3. Clean and dry the tracks

Although it may seem obvious, hard dirt and old lubricant can cause the garage door to stick. In this case, your garage door repair may consist of simply cleaning the tracks and then drying them. You can use regular cleaners to clean the tracks.

4. Lubricate the tracks and rollers

Simply lubricating both the rails and rollers can fix the problem and complete garage door repair in no time. For lubrication, you can use a lubricating spray or a silicone spray. It is probably best to lubricate the tracks after cleaning them. In reality, any moving part will benefit from lubrication.

5. Tighten loose bolts and screws

Bolts and screws tend to loosen over time. Try to check all the screws and bolts involved in the opening / closing mechanism of your door. Sometimes just squeezing them together can solve the whole problem. If you can't tighten the screws because the holes have come loose, you can use a "wood filler" or regular pieces of wood to fill the holes.